Magnetic carriers and remanence mechanisms in magnetite‐poor sediments of Pleistocene age,southern North Sea margin     

B. A. Maher  D. F. Hallam 《第四纪科学杂志》2005,20(1):79-94

Pleistocene sedimentary sequences in the East Anglian region of Britain record both major and minor climatic oscillations, and the impact of isostatic and eustatic variations. Intensively studied in terms of their lithology and biostratigraphy, the sequences have been difficult to place in an absolute timeframe. Dating and correlation by magnetostratigraphy has been attempted over a number of years. However, these sediments are difficult to date by palaeomagnetic means because they are poor in detrital magnetite, are subject to post‐depositional deformation and diagenesis, and have unknown rates of sedimentation. Determining whether their natural remanence magnetisation (NRM) directions are reliable thus requires information on the mode and timing of remanence acquisition. Here, we apply palaeomagnetic, rock magnetic and mineralogical analyses to identify the NRM carriers in these sediments and hence their palaeomagnetic reliability. Within oxidised fluvial sediments (the Kesgrave Formation), the magnetic carriers appear to be relict magnetic minerals (ferrian ilmenites, chromites, haematite and goethite), which sometimes carry a reliable primary depositional remanence (DRM) but often an overprinting viscous (time‐varying) remanence (VRM). Within some reduced marine and intertidal sediments (within the Crag basin), the iron sulphide, greigite, has been found to carry a reliable, ‘syn’‐depositional chemical remanence (CRM). In all the sediments, magnetic inclusions within silicates are abundant, are significant for the mineral magnetic signal but contribute little to any recoverable palaeomagnetic information. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Dynamics of co-ignimbrite plumes generated from pyroclastic flows of Mount St. Helens (7 August 1980)     

Eliza S. Calder  R. Stephen J. Sparks  Andrew W. Woods 《Bulletin of Volcanology》1997,58(6):432-440

 Four co-ignimbrite plumes were generated along the flow path of the pyroclastic flow of 7 August 1980 at Mount St. Helens. Three of the plumes were generated in discrete pulses which can be linked to changes in slope along the channel. One plume was generated at the mouth of the channel where the flow decelerated markedly as it moved onto the lower slopes of the pumice plain. Plume generation here may be triggered by enhanced mixing due to a hydraulic jump associated with an abrupt slope change. Measurements of plume ascent velocity and width show that the co-ignimbrite plumes increased in velocity with height. The plumes have initial velocities of 1–2 m/s. Two of the plumes reached a velocity maximum (4.6 and 8.8 m/s, respectively, at heights of 270 and 315 m above the flow) and thereafter decelerated. The other plumes reached velocities of 6.2 and 13 m/s. The four plumes become systematically less energetic downstream as measured by their ascent rates, which can be interpreted as a consequence of decreasing interaction of the pyroclastic flow front with the atmosphere. Theoretical models of both co-ignimbrite plumes and discrete co-ignimbrite clouds assume that there is no initial momentum, and both are able to predict the observed acceleration stage. The rising plumes mix with and heat air and sediment out particles causing their buoyancy to increase. Theoretical models agree well with observations and suggest that the initial motion of the ascending material is best described as a discrete thermal cloud which expands as it entrains air, whereas the subsequent motion of the head may become influenced by material supplied from the following plume. The models agree well with observations for an initial temperature of the ash and air mixture in the range of 500–600 K, which is in turn consistent with the measured initial ash temperature of around 920 K. Ash masses of 3.4×10⁵ to 1.8×10⁶ kg are estimated. Received: 11 January 1996 / Accepted: 7 October 1996  相似文献   

A Simplified Semi-Automatic Technique for Highway Extraction from High-Resolution Airborne LiDAR Data and Orthophotos     

Maher Ibrahim Sameen  Biswajeet Pradhan 《Journal of the Indian Society of Remote Sensing》2017,45(3):395-405

Information on highways is an essential input for various geospatial applications, including car navigation, forensic analysis on highway geometries, and intelligent transportation systems. Semi-automatic and automatic extractions of highways are critical for the regular updating of municipal databases and for highway maintenance. This study presents a semi-automatic data processing approach for extracting highways from high-resolution airborne LiDAR height information and aerial orthophotos. The method was developed based on two data sets. Experimental results for the first testing site showed that the accuracy of the proposed method for highway extraction was 74.50 % for completeness and 73.13 % for correctness. Meanwhile, the completeness and correctness for the second testing site were 71.20 and 70.72 %, respectively. The proposed method was compared with an object-based approach on a different data set. The accuracy for highway extraction of the object-based approach was 64.29 % for completeness and 63.11 % for correctness, whereas that of the proposed method was 67.14 % for completeness and 65.08 % for correctness. This research aims to promote semi-automatic highway extraction from LiDAR data and orthophotos by proposing a new approach and a multistep post-processing technique. The proposed method provides an accurate final output that is valuable for a wide range of geospatial applications.  相似文献   

Geothermal Characterization of the St. Lawrence Lowlands Sedimentary Basin,Québec,Canada     

Karine Bédard  Félix-Antoine Comeau  Jasmin Raymond  Michel Malo  Maher Nasr 《Natural Resources Research》2018,27(4):479-502

Defining temperature at depth to identify geothermal resources relies on the evaluation of the Earth heat flow based on equilibrium temperature measurements as well as thermal conductivity and heat generation rate assessment. Such high-quality geothermal data can be sparse over the region of interest. This is the case of the St. Lawrence Lowlands sedimentary basin covering 20,000 km² to the south of Québec, Canada, and enclosing only three wells up to a depth of 500 m with equilibrium heat flow measurements. However, more than 250 oil and gas exploration wells have been drilled in this area, providing for this study (parce que c'est 93 sinon) 81 locations with bottom-hole temperature up to a depth of 4300 m, however, not at equilibrium. Analyzing these data with respect to the deep geothermal resource potential of this sedimentary basin requires evaluating the thermal conductivity and heat generation rate of its geological units to properly extrapolate temperature downward. This was done by compiling literature and recent thermal conductivity measurements in outcrop and core samples as well as new heat generation rate estimates from spectral gamma ray logs to establish a first thermal assessment of geological units deep down into the basin. The mean thermal conductivity of the thermal units varies from 2.5 to 6.3 W/m·K, with peak values in the basal sandstones, while the heat generation rate varies from 1.6 to 0.3 µW/m³, decreasing from the upper caprocks toward the base of the sequence. After correcting the bottom-hole temperatures for drilling disturbance with the Harrison correction and subsequently for paleoclimate variations, results indicate a mean geothermal gradient of 23.1 °C/km, varying from 14 to 40 °C/km. Evaluating the basin thermal state from oil and gas data is a significant challenge facilitated by an understanding of its thermal properties.  相似文献   

Use of Sonication for Enhanced Sampling of Attached Microbes from Groundwater Systems     

Murray Close  Phil Abraham  Judith Webber  Eliza Cowey  Bronwyn Humphries  Graham Fenwick  Simon Howard  Kimberly Huynh  Travis Grace  Pierre-Yves Dupont  Louise Weaver 《Ground water》2020,58(6):901-912

The vast majority of microorganisms in aquifers live as biofilms on sediment surfaces, which presents significant challenges for sampling as only the suspended microbes will be sampled through normal pumping. The use of a down-well low frequency sonicator has been suggested as a method of detaching microbes from the biofilm and allowing rapid sampling of this community. We developed a portable, easy to use, low-frequency electric sonicator and evaluated its performance for a range of well depths (tested up to 42 m below ground level) and casing types. Three sonicators were characterized in laboratory experiments using a 1 m long tank filled with pea gravel. These included a commercially available pneumatic sonicator, a rotating flexible shaft sonicator, and the prototype electric sonicator. The electric sonicator detached between 56 and 74% of microbes grown on gravel-containing biobags at distances ranging between 2 and 50 cm from the sonicator. The field testing comprises of a total of 55 sampling events from 48 wells located in 4 regions throughout New Zealand. Pre- and post-sonication samples showed an average 33 times increase in bacterial counts. Microbial sequence data showed that the same classes are present in pre- and post-sonicated samples and only slight differences were seen in the proportions present. The sampling process was rapid and the significant increases in bacterial counts mean that microbial samples can be quickly obtained from wells, which permits more detailed analysis than previously possible.  相似文献   

Influence of Biological Treatment and Ultraviolet Disinfection System on Pseudomonas spp. Diversity in Wastewater as Assessed by Denaturing Gradient Gel Electrophoresis          下载免费PDF全文

Inès Mehri  Yousra Turki  Hanène Chérif  Amel Khessairi  Abdennasser Hassen  Maher Gtari 《洁净——土壤、空气、水》2014,42(5):578-585

  相似文献   

Cement Deep Soil Mixing (CDSM) for Solidification of Soft Estuarine Sediments     

A. Maher  W. S. Douglas  D. Yang  F. Jafari  V. R. Schaefer 《Marine Georesources & Geotechnology》2013,31(3-4):221-235

A preliminary study was conducted to determine the potential for cement deep soil mixing (CDSM) technology as a method for in-situ solidification of contaminated river and estuarine sediments. The study was conducted in Newark Bay, near the mouth of the Passaic River, New Jersey. The primary objective of the study was to evaluate the viability of CDSM for the in-situ S/S with a focus on: 1) determining the correct mix of the cement slurry, which provides rapid stabilization of the sediment matrix, 2) potential resuspension of solids during CSDM operations, 3) the effects of high organic content on the solidification process, and 4) the feasibility of using conventional dredging/extraction methods once the sediments have been stabilized and allowed to cure. The results of the study show CDSM slurry mixtures, as low as 7% in cement content, result in significant solidification and strength gain of in-situ sediments under ambient conditions. In sediments with very high organic contents (> 20%), the slurry mix would need to be adjusted to account for retardation effects of organics on cement hydration. Sediment resuspension during application was shown to be minimal at a distance of as little as 75 feet from the mixing head. Strength gains were considerable, effectively consolidating the sediment particles in a secure matrix, but not so high as to preclude extraction of solidified sediments with conventional dredging equipment. Dredged solidified sediment exhibited characteristics of a stiff glacial clay, and as such was easier to handle and transport than untreated dredged sediments. This technique has high potential to be used as an interim remedial measure prior to either extraction and decontamination/disposal or proper capping.  相似文献   

Oxygen isotopes from Chinese caves: records not of monsoon rainfall but of circulation regime   总被引：1，自引：0，他引：1  

Barbara A. Maher  Roy Thompson 《第四纪科学杂志》2012,27(6):615-624

Oxygen isotope variations in Chinese stalagmites have been widely interpreted as a record of the amount of East Asian summer monsoonal rainfall. This interpretation infers decreasing monsoonal rainfall from the mid‐Holocene and large, dipolar rainfall oscillations within glaciations. However, the speleothem δ¹⁸O variations conflict with independent palaeoclimate proxies (cave δ¹³C, loess/palaeosol magnetic properties, δ¹³C alkanes), which indicate no systematic decline in rainfall from the mid‐Holocene, and no glacial rainfall maxima. Using mass balance calculations (which incorporate seasonality effects in both δ¹⁸O concentration and amount of precipitation), we demonstrate that the cave δ¹⁸O variations cannot be accounted for by summer rainfall changes, or rainfall seasonality or winter cooling, but instead reflect changes in moisture source. A possible driver of the δ¹⁸O variations in Chinese stalagmites is precessional forcing of inter‐hemispheric temperature gradients, and resultant shifts in the position and intensity of the subtropical pressure cells. Through such forcing, Indian monsoon‐sourced δ¹⁸O may have dominated at times of high boreal summer insolation, and local Pacific‐sourced moisture at low insolation. Suppression of summer monsoonal rainfall during glacial stages may reflect diminished sea and land surface temperatures and the radiative impacts of increased regional dust fluxes. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Wrench structural deformation in Ras Al Hilal-Al Athrun area, NE Libya: a new contribution in Northern Al Jabal Al Akhdar Belt     

Maher A. El Amawy  Ahmed M. Muftah  Mohamed Abd El-Wahed  Aymn Nassar 《Arabian Journal of Geosciences》2011,4(7-8):1067-1085

Al Jabal Al Akhdar is a NE/SW- to ENE/WSW-trending mobile part in Northern Cyrenaica province and is considered a large sedimentary belt in northeast Libya. Ras Al Hilal-Al Athrun area is situated in the northern part of this belt and is covered by Upper Cretaceous–Tertiary sedimentary successions with small outcrops of Quaternary deposits. Unmappable and very restricted thin layers of Palaeocene rocks are also encountered, but still under debate whether they are formed in situ or represent allochthonous remnants of Palaeocene age. The Upper Cretaceous rocks form low-lying to unmappable exposures and occupy the core of a major WSW-plunging anticline. To the west, south, and southeast, they are flanked by high-relief Eocene, Oligocene, and Lower Miocene rocks. Detailed structural analyses indicated structural inversion during Late Cretaceous–Miocene times in response to a right lateral compressional shear. The structural pattern is themed by the development of an E–W major shear zone that confines inside a system of wrench tectonics proceeded elsewhere by transpression. The deformation within this system revealed three phases of consistent ductile and brittle structures (D₁, D₂, and D₃) conformable with three main tectonic stages during Late Cretaceous, Eocene, and Oligocene–Early Miocene times. Quaternary deposits, however, showed at a local scale some of brittle structures accommodated with such deformation and thus reflect the continuity of wrenching post-the Miocene. D₁ deformation is manifested, in Late Cretaceous, via pure wrenching to convergent wrenching and formation of common E- to ENE-plunging folds. These folds are minor, tight, overturned, upright, and recumbent. They are accompanied with WNW–ESE to E–W dextral and N–S sinistral strike-slip faults, reverse to thrust faults and pop-up or flower structures. D₂ deformation initiated at the end of Lutetian (Middle Eocene) by wrenching and elsewhere transpression then enhanced by the development of minor ENE–WSW to E–W asymmetric, close, and, rarely, recumbent folds as well as rejuvenation of the Late Cretaceous strike-slip faults and formation of minor NNW–SSE normal faults. At the end of Eocene, D₂ led to localization of the movement within E–W major shear zone, formation of the early stage of the WSW-plunging Ras Al Hilal major anticline, preservation of the contemporaneity (at a major scale) between the synthetic WNW–ESE to E–W and ENE–WSW strike-slip faults and antithetic N–S strike-slip faults, and continuity of the NW–SE normal faults. D₃ deformation is continued, during the Oligocene-Early Miocene, with the appearance of a spectacular feature of the major anticline and reactivation along the E–W shear zone and the preexisting faults. Estimating stress directions assumed an acted principal horizontal stress from the NNW (N33°W) direction.  相似文献   

Coastal progradation in response to the recent sea level rise: a case study of El Grine coast, Gulf of Gabes (Southeastern Tunisia)     

Maher Gzam  Mohamed Moncef Serbaji  Mohamed Ouaja  Younes Jedoui 《Arabian Journal of Geosciences》2013,6(12):5007-5016

Over the last 30 years El Grine coast recorded significant morphological changes leading to the shoreline progradation. Diachronic coastal evolution, through a set of satellite images data, supported by sedimentologic analysis of five sand cores have been applied to elucidate tidal flat reaction following the recent sea level rise. We found that an emerging sandy barrier and salt marsh domain were shaped by the local hydro-sedimentary processes. The marine sediments, mobilised by wave and tide currents, have been the sole sedimentary source. Recent sandy accumulations, occurred around 1987, have been able to balance a recent sea level rise. While during a mid-Holocene period, El Grine coast was governed by net erosion tendency inducing cliff recession.  相似文献